NEWS DETAILS

Purpose and application of laminar flow clean sampling vehicle

日期:2024-07-21 16:25
浏览次数:111
摘要:Sampling vehicle is also known as clean sampling vehicle, purification sampling vehicle, ultra-clean sampling vehicle, clean sampling vehicle, mobile sampling vehicle, explosion-proof sampling vehicle. Laminar flow sampling truck is mainly used in the sampling of raw and auxiliary materials of pharmaceutical preparations and sterile preparations. The sampling truck is a vertical flow local air purification device. Since the indoor air has been filtered through the initial effect, the air from
Sampling vehicle is also known as clean sampling vehicle, purification sampling vehicle, ultra-clean sampling vehicle, clean sampling vehicle, mobile sampling vehicle, explosion-proof sampling vehicle.
Laminar flow sampling truck is mainly used in the sampling of raw and auxiliary materials of pharmaceutical preparations and sterile preparations. The sampling truck is a vertical flow local air purification device. Since the indoor air has been filtered through the initial effect, the air from the high efficiency air filter has reached a high cleanliness working environment.
Laminar flow clean sampling car Laminar flow sampling car Use:
Clean sampling vehicle is widely used in medicine, preparation, electronics, precision instruments, instruments, food and other industries of special occasions raw and auxiliary materials sampling.

Laminar flow clean sampling vehicle/Laminar flow sampling vehicle:
The clean sampling vehicle is moved to the place where sampling is required, and the sampling vehicle (brake) is fixed; Turn on the power supply, turn on the power switch, turn on the fan switch;
The fan starts to work, and the voltage is adjusted to the appropriate level (generally 220V). After the clean sampling vehicle runs for 15 minutes, the sampling bucket is put in.
After the sampling is finished, take away the sampling drum, turn off the fan and power supply, unplug the power cord, and move the sampling car to the original position.
Laminar flow clean sampling vehicle/sampling vehicle environmental requirements:
Normal working conditions: Temperature: 5℃ ~ 40℃
Relative humidity: ≤80%
Atmospheric pressure: 86 ~ 106KPa
Appearance: The sampler box is made of stainless steel or steel plate with decorative curtain
Smooth, vertical, no damage phenomenon.
Foot wheel: flexible and reliable.
Illumination: The average light illumination shall not be less than 300LX.
Purification level: 10,000, 100,000.
Average wind speed: 0.4±20%(adjustable)
Noise: No more than 65db (A)
Vibration: Within the range of wind speed standards, sampling vehicle frame X, Y, Z three
The directional amplitude is less than or equal to 3μm.
Mobile explosion-proof laminar flow sampling vehicle product diagram
Laminar flow clean sampling vehicle/sampling vehicle General configuration:
1, with aluminum frame without partition high efficiency filter filtration efficiency is: 99.99@0.3μm and G4 primary effect filter, to ensure the purification level, static 100 federal 209E standard;
2, both sides of the work area are stainless steel baffle, and the front and back are strip anti-static dust curtain to achieve the ideal dust effect;


3, equipped with large air volume low noise fan to ensure that the wind speed is greater than 0.45m/s;
4, with imported brand differential pressure meter, clearly indicate the pressure difference on both sides of the high efficiency filter, and remind you to replace the high efficiency filter in time;
5, adjustable speed fan design, speed performance is stable, in the state of final resistance of high efficiency filter can still ensure the same air volume;
6, with adjustable footing and universal wheel, moving light and convenient, positioning and placing stable and safe;
7, stainless steel inner bottom hole plate, can be easily placed and removed.