- Laminar flow cabinet
-
Biological safety cabinet
-
Fume hood
-
Pass box
-
air shower
- Autoclave/Steam sterilizer
- Incubator
-
Drying Oven
-
Clean sampling vehicle
-
Medical hand washing sink
-
Weighing booth
-
Particle counter
-
Air sampler
-
Muffle furnace
-
water distiller
-
ozone generator
-
water bath
-
Air purifier
-
vacuum pump
-
Colony counter
-
microcentrifuge
-
Pen PH meter
-
Vortex mixer
-
Anemometer
-
others
-
Glass bead sterilizer
Factory direct sales PP material laboratory fume hood
1. Countertop: PP is resistant to strong acid and alkali, waterproof, corrosion-resistant, non-deformable, non-toxic and easy to clean; 8mm thick pp board is used.
1.2. Cabinet plate: 8mm thick PP plate; all the columns and beams are properly designed to ensure the installation of spare parts, ensuring the bearing and the appearance of the appearance, and the slotting and bending welding of the engraving machine. All joints are welded at high temperatures.
1.3, door panel, drawer panel: 16mm thick PP board; the board surface is not warped, crack-resistant, moisture-resistant, smooth and easy to clean, acid and alkali resistant, corrosion-resistant.
1.4. Handle: It adopts high-quality PP handle, one injection molding, with copper core screw cap to prevent rust; PP injection screw is used when installing the handle to prevent rust.
1.5, screw cap: Where the screw is reinforced, you must use a screw cap to prevent rust.
1.6, window: window can choose 5mm tempered glass and 5mm plexiglass: tempered glass is resistant to high temperature, scratch, easy to clean, afraid of strong acid and alkali, afraid of corrosion; plexiglass window is resistant to strong acid and alkali, corrosion resistance, high temperature I am afraid of scratching.
1.8. Window profile: In order to ensure the smooth sliding of the window glass, it will not be damaged during the sliding process; the special profile is made.
8. Window profile: In order to ensure the smooth sliding of the window glass, it will not be damaged during the sliding process; Window profiles. The material is PVC, and the structure can be divided into: chute, upper frame, left and right frame, drop hand, plug. After special design, it can maintain stable shape without screw fixing.
1.9. Lighting: PP material case with 220V and 30W fluorescent lamps.
2.0, deflector: 5mm thick PP sheet, and fixed with a one-shot injection molded clamp.
2.1. Gas collecting hood: PP is injection-molded and has a diameter of 250mm.