NEWS DETAILS

The clean workbench keeps contaminants from hiding

日期:2024-03-17 01:06
浏览次数:223
摘要:The clean workbench is a kind of air purification equipment that provides a partially dust-free and sterile working environment. It can artificially control the emission of polluted air in the work area through a special filter channel to avoid harm to people and the environment. It is a safe micro Dedicated workbench. It is widely used in laboratories, medical and health, pharmaceutical and other related industries, and has a good effect on improving process conditions, protecting the health of
The clean workbench is a kind of air purification equipment that provides a partially dust-free and sterile working environment. It can artificially control the emission of polluted air in the work area through a special filter channel to avoid harm to people and the environment. It is a safe micro Dedicated workbench. It is widely used in laboratories, medical and health, pharmaceutical and other related industries, and has a good effect on improving process conditions, protecting the health of operators, and improving product quality and output. Such a workbench fully interprets what is meant by "my site is in charge."
Before using the clean workbench, irradiate it with ultraviolet light for half an hour, and check whether all the openable doors and windows around the work area are in the working position. This operation is performed in the center of the operating area. In the design, this is a relatively safe area, and regular maintenance is very important. Before operation, you should have a preliminary understanding of the performance and safety level of the experimental materials and equipment used. Strictly implement laboratory safety regulations. The safety of using specific pathogens on any clean bench must be evaluated. If the experimental material will cause environmental pollution to the surrounding environment, it should be avoided in the model without exhaust filter plate, because the operation in flowing air is the same. No equipment can guarantee the success of the experiment, so skilled operation and clear aseptic conditions are very important.
1. The intensity of the UV lamp tube should be checked regularly according to the manufacturer's regulations. It is recommended to check once every quarter and replace if it fails.
2. Raise the bottom edge of the glass door to a suitable height, turn on the fan, and run the cabinet for half an hour. The test operation in the cabinet can be carried out normally; in order to ensure the safety of operation, the experimental supplies should be placed in the safety cabinet in advance.
3. After using the workbench, lower the bottom edge of the glass door to the bottom, turn on the UV light, and turn off the equipment after more than half an hour.
4. Clean the surface of the operating area of the clean workbench: first wipe the entire surface with a soft cotton cloth dipped in strong soap, then use another cotton cloth or towel soaked in clean hot water or warm water to wipe the soap foam, and then quickly wipe it with a dry cloth or towel . If the surface of the operating area is contaminated or has traces, wipe it with medical alcohol.
5. External surface and glass door cleaning: Use non-abrasive household cleaners and wipe with a soft cotton cloth or towel.