ARTICLE DETAILS

Pure water smoke generator applications

日期:2020-09-21 21:30
浏览次数:40
摘要:Y09-010 pure water smoke generator can produce high concentration of water vapor (particle size range: concentration ratio of 1-10um above 80%), high visibility and no pollution. There is no measurable residue after the vapor is released in the clean room. Y09-010 is suitable for semiconductor and pharmaceutical clean workshop. In what aspects can the product be used: 1. Exhaust system test of chemical treatment equipment 2. Clean room laminar flow test
Y09-010 pure water smoke generator can produce high concentration of water vapor (particle size range: concentration ratio of 1-10um above 80%), high visibility and no pollution. There is no measurable residue after the vapor is released in the clean room. Y09-010 is suitable for semiconductor and pharmaceutical clean workshop.



In what aspects can the product be used:



1. Exhaust system test of chemical treatment equipment



2. Clean room laminar flow test



3. Balance of pressure in and out of the room



4. Verification of personnel safety discharge system



5. Leak test of air duct



Main technical parameters:



External power supply: AC 220V 50Hz



The inner container should be filled with water at one time



Main engine size: 280 × 265 × 300 mm(length × width × height)



Net weight of main engine: 9Kg



Input voltage of smoke generating unit: DC 45V



Rated power consumption: 210W



Fog formation quantity: ≥ 5500ml/h



Atomized particle size: 1-10 microns



Smoke output rate: 0.95m3/min



Water content :1200 ml



Good atomized water level: 28mm



Fog height: 120~150mm



Applicable water conductivity: 0.15~1.00 ms/cm



Relationship between fog formation and working water level



In what aspects can the product be used:



1. Exhaust system test of chemical treatment equipment



2. Clean room laminar flow test



3. Balance of pressure in and out of the room



4. Verification of personnel safety discharge system



5. Leak test of air duct



Main technical parameters:



External power supply: AC 220V 50Hz



The inner container should be filled with water at one time



Main engine size: 280 × 265 × 300 mm(length × width × height)



Net weight of main engine: 9Kg



Input voltage of smoke generating unit: DC 45V



Rated power consumption: 210W



Fog formation quantity: ≥ 5500ml/h



Atomized particle size: 1-10 microns



Smoke output rate: 0.95m3/min



Water content :1200 ml



Good atomized water level: 28mm



Fog height: 120~150mm



Applicable water conductivity: 0.15~1.00 ms/cm



Relationship between fog formation and working water level