Don't forget to do these things after using the CO2 incubator.

The CO2 incubator is an advanced instrument for cell, tissue and bacterial culture and is widely used in microbiology, medicine, agricultural science, and pharmacology. The ultraviolet germicidal lamp is located in the back wall of the box, and can periodically disinfect the inside of the box, which can effectively kill the circulating bacteria in the box and the floating bacteria of the humidifying tray water vapor, thereby effectively preventing pollution during cell culture.

Precautions for use:

1. Before carrying the carbon dioxide incubator, take out the shelf and humidifying tray in the working chamber to prevent the glass door from colliding.

2. If the carbon dioxide incubator is not used for a long time, the moisture in the working room must be removed before closing. Open the glass door and ventilate for 24 hours before closing.

3. The carbon dioxide incubator cannot be turned on before the water is injected, otherwise the heating element will be damaged.

4. If the carbon dioxide incubator is not used for a long time, the moisture in the working room must be removed before closing. Open the glass door and ventilate for 24 hours before closing. The CO2 switch should be turned off to prevent the CO2 regulator from malfunctioning.

5. The water in the tank must be removed before handling the incubator. When draining, put the rubber tube tightly on the water outlet hole so that the nozzle is lower than the instrument, gently suck a mouth, put down the water pipe, and the water siphones out.

6, disassembly and assembly of the indoor support bracket, must use a special wrench, not excessive force.