The manual of ozone generator XM-Y

I. Product overview

Ozone (O3) is oxygen (O2) with isoforms, a gas under normal temperature, low concentration of colorless when the smell of grass, easily soluble in water.Ozone chemistry more lively, strong oxidation ability.When bacteria and harmful chemical substances such as formaldehyde, benzene, ammonia, immediately produce oxidation reaction, thereby the sterilization, to mold, decomposition of harmful gases, and other functions in addition to taste.Ozone and unstable, it consists of one variation of oxygen (O2), in a few hours and will revert to O2, therefore no pollution and residue, it is by far the world's recognized as the only substances to food and beverage directly disinfection.

For a long time, the medical and health care, pharmaceutical, food processing industries, for air disinfection method used ultraviolet irradiation, chemical spray fumigation, chemical dosing method, such as in use there are all kinds of defects and chemical residual.

The emergence of ozone generator products to various industries provides a fast and efficient method of disinfection, safe and reliable, easy to use, is an ideal version of traditional disinfection equipment, can effectively improve the effect of disinfection, has been applied to include food and beverage, scientific research, public education, plant breeding, and many other industries and the object.

II. Product purpose

We produce XM - Y series ozone generator (also known as ozone disinfection machine, three oxygen sterilization machine), is dedicated to the air and water and disinfection sterilization equipment, beauty equipment internal hin independent research and development of ozone discharge unit and a variety of latest circuit protection function, excellent stable performance and long service life.

XM - Y series ozone generator can be widely used in all kinds of food and beverage processing, hospital, medical clinic, livestock and poultry farms, office archives warehouse, hotel, entertainment, purifying workshop, edible fungus inoculation of disinfection, the train car disinfection, college primary school kindergarten, research laboratories and various public places and places of air and water disinfection sterilization, and industry.

III. Product parameter

IV. Disinfection using time reference table

V. Operation Instruction 

1, Before using equipment

The device boot with no installation, the equipment from the packing box, to remove the inner packing, waterproof membrane equipment due to transportation need transfer loading and unloading equipment, plus logistics delivery may be rough handling, the purification equipment co., LTD. Qingdao hin suggest customers in the equipment before use, carefully check whether equipment exist in the process of transportation due to loading and unloading of anomalies (such as by shaking equipment, according to the displacement of voice to determine whether the internal parts, screws is loose, whether thread off, etc.).

Equipment situation after checked, the equipment packing box of the power cord, plug the power cord a suffix (product) in the equipment multi-function power base, and then place the product in the working area (advised to choose a stable solid, dry and ventilated place), on the other side of the power cord to a (three plug) at 220 v voltage socket.To be on the safe side, please connect the ground socket.And please check the wiring circuit on a regular basis.(safety socket to connect ground wire)

2, Ozone air disinfection method of use:

Put ozone generator direct needs disinfection space, set good ozone generator working time (30 minutes, general advice on time setting methods below), can be carried on air disinfection homework, when ozone generator used for air disinfection, ozone disinfection to achieve the best effect, recommend the use of closed sterilized space of doors and Windows, etc.

(solemnly remind: ozone generator air disinfection not move under some condition! Ozone generally decomposed into oxygen around 2 hours, if you need to enter, need to smell the ozone flavour of dense, usually customers are to be carried out after the shift air disinfection.)

3, Ozone water disinfection method of use:

This machine can be carried out on the water disinfection, mainly for all kinds of drinking water, industrial water purification and small hospital clinic medical sewage flow a little water disinfects processing.

Insert equipment the silicone tube side of the packing box in the export of ozone equipment, on the other side in the aeration on the stone, the aeration stone on the need to deal with the water disinfection, ozone generator set out work time length set (please refer to the back table), open the ozone generator power switch work, ozone gas through the silicone tube and aeration stone continually produce a large number of fine bubbles in water, let a good contact with mixed oxide, ozone and water by ozone disinfection effect of the water.

Note: there will be residual ozone water disinfection ozone gases released into the air, please pay attention to ventilation or protective measures.

Water treatment is limited to a small amount of water disinfection, big flow processing, please choose and buy hin MeiZhuan water treatment equipment.

VI. Product failure

1, machine no electricity

A, check whether multi-function power supply base and the power cord plug connection is good, or change the power cord try (this equipment, the power cord and the mainframe computers gm rice cooker line).

B, to check whether there is electric power socket, wire is 220 v ac voltage, zero wire link is normal.

C, check whether the power base of insurance tube need to be replaced.(change insurance tube below)

No 2, ozone output gas output

A air pump or fan is working, inspection equipment, to see if there are any more gas outlet of ozone output.

B, check for gas output, export of ozone machine whether internal pipe joint leakage, fall off, whether link hose winding at a discount.

3, generating ozone (gas output, but not ozone)

Check the time that the timer is on, the timer working mode is correct.If still no ozone produced, please check whether the ozone generating module is damaged.

VII. Product control

Time switch panel:

1, the right two numerical representative work time.

2, the left two values on behalf of the stop time.

3, the back of the letter S values mean a seconds,

M on behalf of minutes (recommended), H represents the hours.

According to the ozone generator working condition, the customer

In everyday use, please use the M units

This time there are two working mode control switch, the customer can according to different way of working and needs to set the time, and then shut off the power to open the equipment operation effect.

1, Equipment cycle working mode

Customers can make equipment automatic cycle, such as customer want equipment to work 12 hours every time, every time

For 20 minutes, the panel can be into digital 12 h20m, 12 h intervals of representative work

Between 20 m representative equipment work.

2, Equipment working timing mode (most customers commonly used way, strongly recommended)

If the customer wants to open the equipment switch, let the equipment work automatically shut off after 20 minutes, can will face

Plate into digital 00 m20m, including 00 m on behalf of the equipment do not need to work, to 20 m on behalf of the need

Let the equipment work time, and so on adjustment Settings.