Product
- Laminar flow cabinet
-
Biological safety cabinet
-
Fume hood
-
Pass box
-
air shower
- Autoclave/Steam sterilizer
- Incubator
-
Drying Oven
-
Clean sampling vehicle
-
Medical hand washing sink
-
Weighing booth
-
Particle counter
-
Air sampler
-
Muffle furnace
-
water distiller
-
ozone generator
-
water bath
-
Air purifier
-
vacuum pump
-
Colony counter
-
microcentrifuge
-
Pen PH meter
-
Vortex mixer
-
Anemometer
-
others
-
Glass bead sterilizer
NEWS DETAILS
Functions, flow directions and precautions of various pass box
日期：2024-09-19 04:43
浏览次数：311
摘要：The transfer window is made of stainless steel plate, smooth and clean. The double doors are interlocked with each other, which can effectively prevent cross-contamination. It is equipped with electronic or mechanical interlocking devices, and is equipped with ultraviolet germicidal lamps.
1. Material transfer window
Function: transfer material
Flow: One-way flow. General area → Class C clean area
Matters needing attention: When transferring materials, the material should no.
The transfer window is made of stainless steel plate, smooth and clean. The double doors are interlocked with each other, which can effectively prevent cross-contamination. It is equipped with electronic or mechanical interlocking devices, and is equipped with ultraviolet germicidal lamps.
1. Material transfer window
Function: transfer material
Flow: One-way flow. General area → Class C clean area
Matters needing attention: When transferring materials, the material should not be too much, and ultraviolet irradiation is required for 30 minutes (except for those that cannot be exposed to ultraviolet light). Clean with 75% ethanol after each use and irradiate with UV light for 30min.
2. Waste transfer window
Function: transfer waste
Flow: One-way flow. Class C clean area → general area
Precautions: Clean with 75% ethanol after each use, and irradiate with UV light for 30 minutes.
3. Blood product delivery window
Function: transfer blood samples, finished products, samples for inspection
Flow: Bidirectional flow. Class C clean area → general area
Precautions: Turn on UV irradiation for 30 minutes before use, turn off UV light when using, clean with 75% ethanol after use, and irradiate with UV light for 30 minutes.
4. Transfer window for frozen samples
Function: transfer cryopreservation, resuscitation, and sample retention products
Flow: Bidirectional flow. Class C clean area → general area
Precautions: Turn on UV irradiation for 30 minutes before use, turn off UV light when using, clean with 75% ethanol after use, and irradiate with UV light for 30 minutes.
1. Material transfer window
Function: transfer material
Flow: One-way flow. General area → Class C clean area
Matters needing attention: When transferring materials, the material should not be too much, and ultraviolet irradiation is required for 30 minutes (except for those that cannot be exposed to ultraviolet light). Clean with 75% ethanol after each use and irradiate with UV light for 30min.
2. Waste transfer window
Function: transfer waste
Flow: One-way flow. Class C clean area → general area
Precautions: Clean with 75% ethanol after each use, and irradiate with UV light for 30 minutes.
3. Blood product delivery window
Function: transfer blood samples, finished products, samples for inspection
Flow: Bidirectional flow. Class C clean area → general area
Precautions: Turn on UV irradiation for 30 minutes before use, turn off UV light when using, clean with 75% ethanol after use, and irradiate with UV light for 30 minutes.
4. Transfer window for frozen samples
Function: transfer cryopreservation, resuscitation, and sample retention products
Flow: Bidirectional flow. Class C clean area → general area
Precautions: Turn on UV irradiation for 30 minutes before use, turn off UV light when using, clean with 75% ethanol after use, and irradiate with UV light for 30 minutes.
