Vertical flow laminar flow cabinet

The vertical flow purification workbench can be widely used in medical and health, biopharmaceutical, food, medical science experiments, optics, electronics, sterile room experiments, sterile microbial inspection, plant tissue culture and inoculation, etc., which require a clean and sterile working environment. Production department. It has a good effect on improving process conditions, protecting the health of operators, and improving product quality and yield. It can also be connected to an assembly line with the advantages of low noise and mobility. It is a kind of air purification equipment that provides local high cleanliness working environment and strong versatility.

Vertical flow purification workbench


The advantages of the vertical flow purification workbench are that it is easy to operate, relatively comfortable, efficient, and short in preparation time. It can be operated for more than 10 minutes after booting, and can basically be used at any time. In factory production, when the workload of inoculation is very large and long-term work is required, the ultra-clean table is an ideal equipment. The ultra-clean table is powered by a three-phase motor with a rate of about 145~260W. The air is blown out after passing through a "super filter" composed of special microporous foam plastic sheets, which is continuous and dust-free. The laminar flow of ultra-clean air of bacteria, the so-called "effective special air", removes dust, ** and ** spores, etc. with a size of 0.3 μm. The flow rate of ultra-clean air is 24-30m/min, which is enough to prevent the pollution caused by the nearby air. Such a flow rate will not prevent the use of alcohol lamps or Bunsen burners to burn the equipment **. The staff operates under such aseptic conditions to keep the sterile materials free from contamination during the transfer and inoculation. However, in the event of a power outage during operation, the materials exposed to the unfiltered air will not be immune to contamination. At this time, the work should be finished quickly and a mark should be made on the bottle. If the material in the bottle is in the proliferation stage, it will no longer be used for proliferation and will be transferred to rooting culture. If it is a general production material, it is extremely rich and can be discarded. If it has taken root, it can be reserved for future planting.