NEWS DETAILS

Illuminometer

日期:2024-12-04 16:20
浏览次数:452
摘要:An illuminance meter (or lux meter) is an instrument that specifically measures luminosity and brightness. The measurement of light intensity (illuminance) is the degree to which an object is illuminated, that is, the ratio of the luminous flux obtained on the surface of the object to the illuminated area. The illuminance meter is usually composed of a selenium photovoltaic cell or a silicon photovoltaic cell and a microammeter. How to use illuminance meter: 1. Turn on the power first. 2.
An illuminance meter (or lux meter) is an instrument that specifically measures luminosity and brightness. The measurement of light intensity (illuminance) is the degree to which an object is illuminated, that is, the ratio of the luminous flux obtained on the surface of the object to the illuminated area. The illuminance meter is usually composed of a selenium photovoltaic cell or a silicon photovoltaic cell and a microammeter.
How to use illuminance meter:
1. Turn on the power first.
2. Open the detector cover and place the light detector horizontally on the measuring position.
3. Find a suitable measurement gear.
4. The illuminance meter starts to work and displays the illuminance value on the display.
5. The data displayed on the screen changes constantly. When the displayed data is relatively stable, press the HOLD key (⑧ key) to lock the data.
6. Read and record the observed value displayed in the reader. The observed value is equal to the product of the number displayed in the reader and the range value.
7. Press the lock switch again to cancel the reading lock function.
8. For each observation, read three consecutive times and record.
9. After the measurement is completed, press the power switch to cut off the power.
10. Finally, when we use up the illuminance meter, we need to close the light detector cover and put it back in the box.
  Precautions:
1 Photocell uses selenium (Se) photovoltaic cell or silicon (Si) photovoltaic cell with good linearity; it can maintain good stability and high sensitivity after working for a long time; when high E is selected, high internal resistance photovoltaic cell is used, which has low sensitivity and good linearity , Not easily damaged by strong light.
2. There is a V(λ) correction filter inside, which is suitable for the illuminance of a different color temperature light source with small error.
3. Add a cosine angle compensator (opal glass or white plastic) before the photocell because the photocell deviates from the cosine law when the incident angle is large.
4. The illuminance meter should work at or near room temperature (the drift of the photocell changes with the temperature.